Hello Quick Quotes friends, Kathi here today to share with you two Christmas Cards using the new Winter Bliss collection.
I used a plastic brick stencil from Want2Scrap. Using modeling paste, I filled the stencil completely carefully removing the brink form, washed it off with soap and water. I set the piece of paper to the side to dry.
Pin It Now!
Winter Bliss Snowflake Christmas Cards, I used both colors from Winter Bliss.
I also used the paste to create snow around the brick. After the brick dried I used glue with a white flocking to create a snow like appearance.
On the pink paper I used three layers of the paper layering each layer 1/4" smaller as I stacked them. The edges were distressed by using scissors. The laser snowflakes & the inside of the paper dole were distressed with the pixie pink chalking ink. the glue was applied to the snowflakes then dipped into white/clear glitter. I layered the paper with the last layer popped up using pot dots & then a light pink ribbon was created into a soft bow, Want2scrap bling was added to the center of each of the snowflakes.
Quick Quotes Supplies:
Winter Bliss *New*
Laser Cut Snowflakes
Other Supplies:
Enamel Dots - Want2Scrap
Pink Wire Ribbon
Pink Wire Ribbon
Square Paper Doiley
Intricate Doiley - Gypsy Soul Lasercuts
Thanks for stopping by the blog enjoy all the new creations made by each of the designers.
